Poland has unveiled a full-sized demonstrator of a new heavy infantry fighting vehicle (IFV) intended to put more armor and firepower between mechanized troops and the increasingly lethal threats of the modern battlefield. The unveiling comes as Poland undertakes a sweeping modernization of its armored forces, driven in large part by the threat posed by Russia.

Huta Stalowa Wola, part of state-owned Polska Grupa Zbrojeniowa, presented the Ciężki Bojowy Wóz Piechoty (CBWP), or Heavy Infantry Fighting Vehicle, at the MSPO defense exhibition in Kielce, Poland, today. The vehicle, commonly referred to as Ratel (honey badger), is the latest step in a Polish effort to develop a heavily protected tracked combat platform that can complement the lighter, amphibious Borsuk (badger) infantry fighting vehicle.

“The demonstrator presented today confirms that Polish companies possess the expertise to design and develop advanced combat platforms that meet the demands of the modern battlefield,” Adam Leszkiewicz, president of PGZ’s management board, said during the unveiling.

OTO ON. CIĘŻKI BOJOWY WÓZ PIECHOTY.

Po dniach odliczania i pokazywania tylko fragmentów odsłaniamy najważniejszą premierę PGZ na #MSPO2026.

CBWP to nowa ciężka platforma opracowana przez Hutę Stalowa Wola – z wysokim poziomem ochrony, dużą mobilnością i siłą ognia… pic.twitter.com/kazs4ciGMj

— Polska Grupa Zbrojeniowa (@PGZ_pl) September 8, 2026

At approximately 40 tons, the CBWP is about 12 tons heavier than the roughly 28-ton Borsuk (and adds an axle, for seven road wheels on each side), the result of a fundamental difference in design philosophy.

Borsuk was conceived as a relatively lightweight IFV able to operate alongside mechanized infantry while retaining the ability to swim. The CBWP instead prioritizes protection and battlefield survivability, placing it in the growing category of heavy IFVs being developed and operated by NATO countries and others.

The vehicle will have a three-person crew and carry up to eight infantrymen. Its primary role is to transport those troops safely into contested areas while providing direct fire support once they reach the objective.

The war in Ukraine has demonstrated how quickly armored vehicles can be exposed to anti-tank guided missiles, mines, artillery fragments, loitering munitions, and small drones. Even vehicles that survive direct attacks can be functionally disabled by damage to tracks, sensors, or external equipment.

A Ukrainian M2A2 Bradley engaging and damaging a Russian T-90M in a close-range fight. After a mission kill, the T-90M is subsequently finished by an FPV drone:

The Ukrainian Bradley IFV damaged the no-analogue russian T-90M "Breakthrough" in a close fight. Then an FPV drone finished this long-suffering tank.

Maybe, the T-90M tanks should be renamed into "Broken".

: 47th Mechanized Brigade pic.twitter.com/b3ShfqbTd9

— Defense of Ukraine (@DefenceU) January 13, 2024

While Ukraine has shown that armor is increasingly easy to find and attack, and thus less relevant, Warsaw is far from convinced that armored vehicles are now irrelevant, with multiple acquisition projects underway. However, Ukraine does change what these vehicles need to be able to do and how they must be employed to have a chance of survival. In certain circumstances, when properly concealed, dispersed, and integrated with counter-drone capabilities, armor is still seen as important for protected mobility and firepower by militaries around the globe.

According to PGZ, the CBWP’s design therefore puts considerable emphasis on survivability. It incorporates advanced ballistic and mine protection designed to meet relevant STANAG standards. It also uses specialized mine-resistant seats intended to reduce the effects of explosions beneath the hull.

The protection architecture can be supplemented by an active protection system (APS). If integrated on a production vehicle, such a system could provide another layer of defense against incoming anti-tank weapons, and potentially small drones, although PGZ has described the APS as an optional component rather than specifying a particular production configuration.

For detecting threats, the vehicle can employ laser-warning equipment including the OBRA-3 system, integrated with smoke grenade launchers. A laser warning can provide the crew with an indication that the vehicle has been illuminated by a rangefinder or targeting system, potentially allowing it to react before an anti-tank weapon is launched.

A video showing a test of the OBRA-3 protection system on a Polish Rosomak wheeled armored fighting vehicle, with a smoke screen being generated to blind hostile optics. The view is from the driver’s compartment:

The CBWP will also carry an integrated nuclear, biological, and chemical protection system, allowing the crew and embarked infantry to operate in contaminated environments.

Firepower comes from the ZSSW-30 remotely operated turret, one of the most important locally developed systems in Poland’s current armored vehicle modernization effort.

The turret is equipped with a 30mm cannon armed with programmable ammunition, plus Rafael Spike anti-tank guided missiles. Together, the weapons are intended to give the CBWP the ability to engage armored vehicles, infantry, and other battlefield targets while also providing a degree of capability against aerial threats. In particular, the programmable ammunition provides greater flexibility against different target types — such as drones — by allowing the projectile’s effects to be tailored to the engagement.

The inclusion of Spike missiles gives the vehicle an extended-range anti-armor option beyond the effective range of its automatic cannon. Much more than a traditional anti-tank guided missile, Spike provides an indirect-fire capability including the option to loiter over a particular area and search for targets, among other attributes.

The ZSSW-30 also gives Poland a degree of commonality across its growing fleet of modern armored vehicles, with the system already being introduced on Borsuk and on some Rosomak wheeled armored fighting vehicles.

The CBWP reflects a trend for fighting vehicles that blur the boundaries between traditional IFV and infantry-support concepts. It is expected to carry a relatively large infantry squad while possessing the sensors and weapons necessary to remain directly involved in combat alongside those troops. At the same time, its high level of protection makes for a notably large vehicle.

The new vehicle is just one part of Poland’s broader military modernization.

Warsaw has embarked on one of NATO’s most ambitious efforts to expand and modernize its ground forces, with major acquisitions of two different types of main battle tank, artillery, rocket systems, and infantry fighting vehicles. Poland is simultaneously expanding domestic production capacity, seeking to ensure that at least part of the equipment needed for a larger army can be produced and sustained within the country.

The Borsuk program is central to that effort and is intended to replace Poland’s aging Soviet-designed BWP-1 (the Polish version of the BMP-1).

The heavier CBWP offers even more capability, but its heavier weight comes with tradeoffs. It will be inherently less flexible than a lighter amphibious IFV, and more costly. In return, it will give Polish commanders another option for missions where survivability matters more than swimming capability or rapid deployment.

Such a vehicle would be particularly important for units operating in heavily contested areas, where the threat from mines, anti-tank weapons, and drones makes protection a higher priority. This provides some indication of what Polish planners expect a conflict with Russia on Europe’s eastern flank to look like. However, lessons from Ukraine show that, whatever its quality, an armored fighting vehicle will only be as survivable as the network and tactics around it.

Still, the CBWP remains some distance from operational service.

PGZ currently has one operational demonstrator, intended for factory trials. The company plans to subsequently construct two fully functional prototypes, with both expected to be ready in 2027.

Those vehicles will then undergo intensive testing with the Polish Armed Forces. The results could lead to changes in the protection architecture, turret integration, or other elements before a production configuration is finalized.

PGZ has indicated that it could be ready for production as early as 2029, but that timeline is not yet a firm procurement schedule. It will depend on the results of testing, any modifications required during development, and negotiations with the customer.

Poland has been reported to be considering a requirement for up to 700 CBWP vehicles. In addition, Poland has so far contracted for 257 Borsuk IFVs, with another roughly 1,000 Borsuk-family combat and specialized vehicles envisioned under a broader framework agreement.

If the program succeeds, Poland will ultimately field a highly capable two-tier tracked IFV force in which the CBWP equips units expected to operate in the most dangerous portions of the battlefield.

Contact the author: thomas@thewarzone.com

The post This Is Poland’s New Heavy Infantry Fighting Vehicle appeared first on TWZ.

A handful of aviation photographers got a surprise eyeful of a very sleek and large aircraft silhouette on Thursday night at Long Beach Airport. One of them was Ricky Schol, who saw the mysterious airframe emerge from a hangar, prompting a double take. It was the first time in his 16 years of aviation photography at the historic airport he’d ever seen anything like it.

“I was driving home past my local airport Thursday evening here in Southern California when I saw a bright light coming from a hangar I haven’t seen open in a long time, so I doubled back to check it out,” Schol told us. “I was blown away when I pulled over and saw the future in front of my eyes. I had no clue what I was looking at. I jumped out of my vehicle and started taking pictures immediately.”

“At first glance I thought it was an F-117 Nighthawk when driving by,” said Schol, a plumber by trade. “That’s why I doubled back to see. And to my surprise I saw something I’ve never seen before, having no cockpit. It left me with a very curious feeling.”

Schol said he did some asking around and learned more details. He would soon learn that the mysterious aircraft design was the RAVN X, an aircraft meant to launch payloads into space, made by Aevum Aerospace of Huntsville, Alabama. Schol was kind enough to share some of the photos he took of the aircraft, which he said he saw from about 100 feet in the distance. You can find his work on Instagram at @aggressoraviation_.

As you can see from the images below, the aircraft bears the FAA N-Number N567RX, which has been reserved by Aevum to an address at the airport, but it appears to be a mockup — one we have likely seen before.

A mockup of the drone was introduced online with great fanfare in 2021 and described at the time by company CEO Jay Skylus as the “mothership” for a two-stage rocket able to carry a payload of just over 1,000 pounds. 

From our story when the RAVN X was unveiled: “The twin-engine Ravn X drone — described by the company as the first stage of the system — reportedly weighs 55,000 pounds, is 80 feet long, and has a wingspan of 60 feet — roughly the size of an A-5 Vigilante. The sleek drone… has seemingly been tailored for speed.” 

During the mockup roll-out, the company described what we noted back then was a “very ambitious, if not almost bizarre timeline” for getting Ravn X into the air. The plan was to start with “vehicle-level testing” to obtain the required airworthiness certification and launch licensing for operations, a process that should take 18 months, Skylus claimed. From there, Aevum planned to secure airworthiness certification for the first-stage drone from the Federal Aviation Administration. 

Following that, the next step was to commence orbital launch tests from Cecil Spaceport in Jacksonville, Florida, by late 2021. 

It is unclear whether Aevum achieved any of its goals. There are no details on the company website and the most recent information about RAVN X is from Gunter’s Space Page, a website that tracks launches.

“In December 2020 Aevum rolled out a mock-up of the Ravn-X carrier plane (although claimed to be a real prototype), but no further activities have been noticed so far,” noted Gunter’s Space Page. “It is doubtful, that any real hardware has been produced so far. By August 2024, all activities seem to have stopped.”

We reached out to Skylus and Aevum for more details.

Given that RAVN X has all but disappeared from public notice, Schol and a few other photographers at the airport caught a rare glimpse.

“I was there from the time they pulled it out to the time they pulled it in,” he told us. “They lined it up on the runway. It moved a little bit, but not much.”

Schol said he didn’t hear the engines or see any exhaust.

“I don’t know exactly what they were testing or trying to accomplish that night,” he proffered.

Mockups can be modified for limited ground tests and other important work, which could be the case here. Regardless, RAVN X does appear to still be alive as a program.

If we find out any details, we will pass them along.

UPDATE: 7:12 PM Eastern Sept. 8:

In posts on X, Skylus said Aevum “conducted Test 2 of Ravn X SN0 early this morning. Ravn X completed its first fully autonomous taxi. ~37 minutes of autonomy. We’re reviewing the telemetry and test data now and will share more as soon as I can..”

@aevumspace conducted Test 2 of Ravn X SN0 early this morning. Ravn X completed its first fully autonomous taxi. ~37 minutes of autonomy. We’re reviewing the telemetry and test data now and will share more as soon as I can.

— Jay Skylus (@jayskylus) September 8, 2026

He also clarified that the aircraft is “currently operating in a development ground-test landing gear configuration. The flight landing gear assemblies are already in our hangar and will be integrated during a near-term test phase. The current campaign is focused on validating our AI and autonomy stack in real-world operation; validating steering, GNC, and the V1 electric propulsion/braking system; and collecting real-world data used to continuously train and improve our AI. V2 of the electric propulsion/braking system is already in development for subsequent testing.”

On its website, the company teases an “Aevum Autonomy Unveiling” scheduled to take place on Nov. 19. However, there are no details about what is being unveiled.

For clarity: @aevumspace Ravn X SN0 is currently operating in a development ground-test landing gear configuration. The flight landing gear assemblies are already in our hangar and will be integrated during a near-term test phase. The current campaign is focused on validating our…

— Jay Skylus (@jayskylus) September 8, 2026

Contact the author: howard@twz.com

The post Mysterious Black Jet That Emerged At Long Beach Airport Identified (Updated) appeared first on TWZ.

American Rheinmetall and General Dynamics Land Systems have now delivered the first prototypes of their proposed XM30 Mechanized Infantry Combat Vehicle (MICV) designs to the U.S. Army. The XM30 program is the Army’s latest attempt to replace its fleet of Bradley Fighting Vehicles. The competing MICV designs are set to be put to the test alongside early prototypes of the next-generation M1E3 Abrams tank in the spring.

The U.S. subsidiary of Germany’s Rheinmetall has been developing a version of its Lynx family to meet the Army’s MICV requirements, and announced the delivery of the first example today. General Dynamics Land Systems (GDLS), which is offering the Wolf, a further evolution of the company’s Griffin III, itself derived from the ASCOD 2 infantry fighting vehicle, said last week that its first prototype had arrived at the Aberdeen Proving Ground in Maryland. Variants and derivatives of the Lynx and ASCOD 2 are already in service with several countries, which we will come back to later on.

The press release today from American Rheinmetall says the company will eventually deliver eight prototypes to the Army for further testing. It is very likely General Dynamics Land Systems will be supplying an equivalent number of vehicles, but the company does not appear to have confirmed that explicitly at the time of writing. Army budget documents released earlier this year show the service is planning to acquire at least 108 XM30s through Fiscal Year 2031. The Army has some 2,500 Bradleys in service today, a figure that includes multiple variants and subvariants.

“Delivering our first prototype to the Army is an important step as the XM30 Combat Vehicle program enters a more visible phase,” Matt Warnick, CEO of American Rheinmetall, said in a statement accompanying the release. “Team Lynx now has the opportunity to show the Army that we can deliver on the promise of a modern replacement for the Bradley.”

“I could not be happier to be part of the GDLS team that is delivering this incredible new capability on schedule to the Army – they need it now,” Geoffrey Norman, Director for U.S. Strategy & Growth at General Dynamics Land Systems, had written last week in a post on LinkedIn. “The work continues as this first vehicle gets into the Army’s hands.”

The Lynx and Griffin III-based XM30 designs both feature hybrid-electric propulsion. This will offer improved fuel economy, added electrical power generation, and other benefits compared to the Bradley with its traditional diesel engine. The vehicles both have remotely operated turrets, with their two-person crews, as well as up to six passengers, all riding in the hull.

The Army expects the winning XM30 to provide significant boosts in lethality and other capabilities compared to any existing version of the Bradley. The main weapon on both competing designs is an XM913 50mm automatic cannon, offering a significant increase in firepower compared to the 25mm M242 on the Bradley.

The XM30 will also be able to launch loitering munitions. AeroVironment’s Switchblade 300 has been integrated onto General Dynamics Land Systems’ design. American Rheinmetall’s entry is designed to be able to fire versions of Raytheon’s Coyote Block 3, but whether it can launch other munitions is unclear. The launchers on the Lynx-based XM30 are known to also be capable of firing anti-tank guided missiles, such as the TOW and Javelin. The Army has demonstrated the ability to fire a version of the Coyote from the TOW missile launcher on the Bradley, as well.

Next-generation fire control, sensor, and networking/communications capabilities are also key to the Army’s current Bradley replacement plans. With its improved network connectivity, the service envisions XM30s acting as controllers for uncrewed ground vehicles, as well. The Army has already been working to prove out future crewed-uncrewed teaming concepts using the Bradley.

Overall, the Army sees the XM30 as a future “cornerstone of the Armored Brigade Combat Team (ABCT), designed to enhance lethality, survivability, and maneuverability in high-intensity combat against near-peer adversaries,” according to the Army’s Fiscal Year 2027 budget documents. “The XM30 is versatile in its operational roles, capable of leading the charge, scouting ahead, or providing overwatch while Soldiers dismount and maneuver. Its ability to control robotic systems and semi-autonomous platforms adds another layer of capability, allowing the formation to extend its reach and maintain dominance across the battlefield.”

“The XM30 program is not just a replacement for the Bradley Fighting Vehicle – it represents a transformative leap in ground combat vehicle development. The XM30 is more than a vehicle; it is a software-defined platform designed for interoperability and adaptability, ensuring it evolves with changing technologies and operational demands,” the budget documents continue. “By leveraging digital engineering and modular open systems architecture (MOSA), the XM30 ensures infantry units always have the cutting-edge tools they need to outmaneuver and outgun the enemy. The XM30 also achieves a level of logistical efficiency that ensures sustained operational readiness while reducing costs and complexity.”

The Army now plans to put the XM30 prototypes to the test during a regular rotation at the sprawling National Training Center (NTC) at Fort Irwin in California next spring, according to a report last month from Breaking Defense. Soldiers assigned to the 1st Brigade Combat Team, 1st Cavalry Division out of Fort Hood in Texas, will operate the vehicles. 1/1st Cavalry is one of the Army’s so-called Transformation In Contact (TIC) units, which are supporting the service’s broader modernization objectives. The brigade is expected to bring prototypes of the next-generation M1E3 Abrams tank to the NTC, as well.

The Army has talked in the past about aiming to field a winning XM30 design by Fiscal Year 2029. However, it remains to be seen when it might make a final selection and when the first of those vehicles actually enter operational service.

“We have a plan to carry two vendors as long as we possibly can. It becomes a question about resourcing the money, because you’re not paying necessarily double, but you’re kind of paying double,” Army Brig. Gen. Troy Denomy, Program Acquisition Executive of Maneuver, told Breaking Defense for its story in August. “We’re absolutely trying to keep our options open as long as we can, but money matters.”

That being said, “if there’s not a clear winner at the end of the NTC rotation, ‘then it may be worth not selecting at that point,’ Denomy said,” per Breaking Defense.

This is hardly the first time the Army has attempted to replace the Bradley since it first entered service in the 1980s. Cost, weight, and other factors have derailed several previous attempts, including the Optionally Manned Fighting Vehicle (OMFV) effort that directly preceded the current MICV program. In February, another report from Breaking Defense had raised questions about the XM30’s future after at least a temporary program pause within the last year. That was followed by a new request for information for a different, but very similar-sounding vehicle.

As mentioned, the two competing XM30 designs are based on vehicles that are in operational service today. Hungary became the first operator of a Lynx variant last year, and Ukraine is also in the process of procuring versions of that design. Today, Spain is the primary operator of the ASCOD 2, with Latvia also working to field a fleet of those vehicles. The British Army’s much-troubled Ajax is also derived from the ASCOD 2. The U.S. Army’s now-cancelled M10 Booker ‘light tank’ is another member of this broader family.

It is worth noting here that there has been much debate in recent years about the utility of heavy armored vehicles like the Bradley, as well as the Abrams tank, in future conflicts. Armored and unarmored vehicles face a growing multitude of threats, including more and more capable anti-tank guided missiles and especially kamikaze drones. Reporting earlier on in the conflict in Ukraine had underscored the continued value of heavy armor, including of the Bradley, even if its place as a decisive factor on the battlefield was diminishing. However, a report just last week from The New York Times indicated that tanks, in particular, have become increasingly sidelined, largely due to the threat of drone attacks.

The Army is also now in the midst of a new leadership shakeup with the resignation of Army Secretary Dan Driscoll. Reports say Driscoll’s departure follows growing friction with Secretary Pete Hegseth, including over modernization efforts.

In the meantime, examples of both of the designs competing to become the future XM30 are now in Army hands and are set to be tested alongside the M1E3 next year.

Update: 5:23 PM ET –

GDLS has now put out a brief press release regarding the delivery of the first Wolf prototype to Aberdeen Proving Ground, which it says occurred on August 21.

“This on-time delivery will allow Soldiers to start putting the Wolf through its paces, with the ultimate goal of getting it fielded into armored brigades as quickly as possible,” GDLS’ Norman said in a new statement accompanying the release. “I would like to congratulate our XM30 team on the successful design and production of this game-changing solution. The Wolf is the most technologically advanced combat vehicle ever assembled.”

The release also included the picture below, showing the Wolf prototype entirely under wraps on a trailer.

Contact the author: joe@twz.com

The post Competing Bradley Fighting Vehicle Replacement Prototypes Delivered To The U.S. Army (Updated) appeared first on TWZ.

Murad Ali Shah said greater use of electric vehicles would help reduce reliance on imported fuel.

The post Sindh Cabinet approves new electric vehicles tax relief package appeared first on BOL News.